Connections central heating.

We decided to connect our private house in Kazan to central heating. Fortunately, our boiler house is located three hundred meters from our house. Approved the project, purchased pipes. But according to the project, some sections of pipes should bend around sewer wells in the path of the boiler house, that is, pipes should be bent. Tell me how to bend metal pipes so that they do not break?
There are 3 answers
Bernardo
Bernardo
Answered on August 30, 23:25
I would have overpaid at your place, but I entrusted the implementation of this project to professionals. So that in the winter your heating will not burst, and you will not stay in a cold house.
Best
Dima Volkov
Dima Volkov
There are few professionals in fact who will provide advice on this matter. Most likely, to install large diameter polypropylene pipes from agpipe.ru - the Agpipe Group of Companies in this case would be a reasonable solution. Since in places where pipes need to be bent, it will fit just not from metal.
Answered on September 30, 13:02, Bernardo |
Archer
Archer
Answered on August 30, 23:29
There is a special device called a pipe bending machine. But they still need to be able to use it, so without help you cannot cope with this problem.
Best
Radeon
Radeon
Answered on August 30, 23:35
With a ready project of your heating main, you can turn to companies that deal with flexible metal in Kazan. Based on your project documentation, they can bend the pipes in the right places. And you can even find such companies through the Internet.

Related news

Connections central heating image, picture, imagery


Connections central heating 77


Connections central heating 20


Connections central heating 35


Connections central heating 50


Connections central heating 94


Connections central heating 48


Connections central heating 29